![]() ![]() When you are ready to stick the decal, all you need to do is realign the top of the transfer tape with the mark on your surface, and viola! Your decal has been perfectly placed. Make sure your decal is applied in the correct place by placing it on your chosen surface before the backing is peeled off and mark along the top edge. ![]() If it feels very cold or quite warm to the touch it may be a good idea to wait to apply the decal so the surface is at a better temperature. If you are unsure of the temperature, you can put your hand on the surface you want to apply your decal. Most decal adhesives will not work if they are exposed to temperatures above 90☏ (32☌) or below 50☏ (10☌). Hot Tips & Frequently Asked Questions Avoid Applying Decals In Very Hot Or Cold Temperatures You can now sit back and enjoy your newly decorated space. The process is the same, begin and the center of the design and firmly move any air bubbles outward until they can escape.Ĭongratulations! The application process is complete. It may be easier to remove some air bubbles without the transfer tape. Remove Any Air Bubbles Left Under The Decal Just make sure to move slowly so none of the decal’s design impact is lost and reapply where necessary. This step is trickier if your decal design is small or detailed as smaller vinyl is more likely to not stick to the surface properly. If this happens, just replace the transfer tape back down onto the surface and repeat the previous step so the vinyl is stuck. It is important to go slowly here so the vinyl decal is not lifted up with the tape. Carefully Peel Back The Transfer Tapeīegin at one of the corners and peel back the transfer tape. Slowly move outward from the center to cover the whole of the design, making sure any air bubbles are removed and the decal sticks firmly to the surface.ĭo not worry if some air bubbles are still under your decal, these can be removed later. Using a ruler, credit card, Cricut scraper, or similar, begin at the center of your decal and rub using firm pressure. Firmly Rub The Decal With Something Hard To Make It Fully Adhere Press down with your hands to make sure it is stuck. Moving slowly at this point will reduce the amount of air bubbles trapped under the vinyl, preventing any wrinkles from appearing when you are done. Be careful to make sure your application is precise by lining up the top of the decal first, then slowly moving down to the bottom until the decal is lying flat on the surface. Line up your decal with any markings you have made on your surface. If this does happen, simply reattach by laying the transfer tape and decal back onto the backing material and pressing together before trying again. Start from a corner and be sure to go slowly so the decal is not damaged or distorted by becoming stuck to the backing. Peel the transfer tape and decal away from the backing material. Most decals are attached to the backing material with a layer of transfer tape over the top, making application easier. It is also a good idea to use a level to ensure your decal is laid straight, particularly for larger pieces. If you want it to be centered, make sure you measure the surface and mark the center. ![]() It is important to decide where you want the decal to be stuck before the backing material is peeled away as it cannot be moved once it is in place.Įxperiment with positions of the decal against the surface to find your preference. You just need to make sure that the surface is not going to be damaged by doing this and is dry before you stick the decal on. If the surface needs to be cleaned, wipe the area with some soapy water and a clean rag. It is a good idea to avoid porous surfaces – surfaces like cement, leather, or brick – as the decal will not adhere properly. The perfect decal surface is smooth, dust-free, and clean. Preparing the surface ready for your decal is important to make sure the decal properly sticks and does not peel away prematurely. Remove any air bubbles left under the decal.Firmly rub the decal with something hard to make it fully adhere.Decide where you want to stick the decal.This handy guide will first take you through some quick instructions and then some more detailed information so you can be sure you are getting the most from your decal collection. So how do you apply vinyl decals properly? Vinyl decals are a good way to personalize items or spaces, offering cost-effective decorations that can be easily applied.īut there is nothing worse than buying decals to brighten up your space, only to have them ruined by air bubbles or premature peeling.
0 Comments
Leave a Reply. |